Suction and delivery Hoses

Suction Hoses

These hoses are made from wear resistand material and reinforced
by steel or PVC spiral in order to resist vacuum on the suction end.
Send request
Amazone Metalflex WSD
     

Plasticized super elastic PVC hose reinforced by a rigid PVC spiral (anti shock).

  • Diameter: 20 - 200 mm
  • Working pressure: 1.5 to 6 bar
  • Vacuum: -0.8 to -1 bar
  • Temperature range: -20° till 60°C

Application: Suction and discharge for used water, especially as equipment for trucks

Technical specification >> 

 

Plasticized super elastic PVC hose reinforced by steel spiral.

  • Diameter: 8 - 150 mm
  • Working pressure: 1.5 to 5 bar
  • Vacuum: -0.9 bar
  • Temperature range: -10° till 60°C

Application: Suction and discharge at low pressure for public work, agriculture, pumps

Technical specification >>

Mandrel built suction & delivery hose for water and non corrosive fluids.

  • Diameter: 20 - 300 mm
  • Working pressure: 10 bar
  • Vacuum: -0.7 to -0.9 bar
  • Temperature range: -30°C till +80°C

Application: Water and inert fluid suction & delivery with optimal flexibility and strength

 Technical specification >>

Discharge hoses

The most most cost-efficient way for water discharge is to use soft PVC flat hoses.
These hoses can be easily rolled and installed in the necessary place.
For diameters over 150mm it is recommended to use reinforced rubber hoses.
Send Request
Lay flat  Firefighting WD
   

Plasticized PVC lay flat hose reinforced by polyester thread, possibility to roll up if flat.

  • Diameter: 25 - 150 mm
  • Working pressure: 2 to 3 bar
  • Temperature range: -10° till 60°C

Application: Discharge of water at low pressures

Technical specification >>

Flat one-pieced hose. Inside - black synthetic rubber, outside - polyamide tissue.

  • Diameter: 38 - 150 mm
  • Working pressure: 15 bar
  • Temperature range: -10° till 60°C

Application: Discharge of water under high pressure

Technical specification >>

Mandrel built delivery hose for water and non corrosive fluids. 

  • Diameter: 13 - 254 mm
  • Working pressure: 10 bar
  • Temperature range: -30°C till +80°C

Application: Water and inert fluid delivery hose with optimal flexibility and strength

Technical specification >>

 

See also